​​​​​​

​​​​​​​​​​​​​Faɗa mana masana'antar ku da buƙatunku na yau da kullun.
Sami shawarar kayan aiki a cikin daƙiƙa 30.

Canje-canjen zafin jiki da danshi suna daga cikin matsalolin muhalli da suka fi shafar kayayyakin da ke fuskanta a masana'antu, sufuri, ajiya, da kuma aiki. Ɗakunan muhalli na LIB suna taimaka wa masana'antun gano yiwuwar gazawa kafin kayayyakin su isa kasuwa - tare da daidaitaccen tsarin kula da zafin jiki, daidaitawar da za a iya gyarawa, da kuma cikakken tallafin bayan tallace-tallace.

Kwaikwayi yanayin zafi mai yawa, ƙarancin zafi, danshi, girgizar zafi, da kuma yanayin damuwa mai haɗuwa — wanda ya cika IEC, MIL-STD-810H, JESD, da sauran ƙa'idodin ƙasa da ƙasa.

---

3- Garanti na Shekara  29 Wakilan Duniya  4 Cibiyoyin Hidima na Ƙasashen Waje Kula da Rayuwa · Shawarwari kan Injiniya

 

Wane Ma'aunin Gwaji ne Masana'antar ku ke buƙata?

Nemo kayan aiki masu dacewa da kuma waɗanda aka ba da shawarar don masana'antar ku, ko amfani da kayan aikin zaɓi da ke sama.

Masana'antu / Aikace-aikace	Matsayin gama gari	Gwajin da aka Ba da Shawara	Kayan aikin da aka shawarta
Kayan lantarki	IEC 60068-2-14 / MIL-STD-810H	Zagayen zafi / bugu	→Thermal Shock Chamber →Ɗakin Zagaye na Zafi
Batirin Lithium / Fakiti	UN 38.3 / IEC 62133	Tsaron batirin da cin zarafi	→Ɗakin Tsaron Baturi
Aerospace	IEC 60068-2-13 / MIL-STD-810H	Tsayi / ƙaramin matsin lamba	→Ɗakin Gwaji Mai Tsayi
Mai amfani da Electronics	IEC 60068-2-78 / MIL-STD-2164	T/H mai ɗorewa · ESS	→Zazzabi Chamber
PV Modules	IEC 61215 (MQT 13)	Zafin danshi mai zagaye	→Ɗakin Zafi na PV Mai Daɗi
Rufi / Manne	IEC 60068-2-2 / J-STD-033	Gwajin bushewa	→Tanda Busarwa ta Masana'antu
Manyan Taro / Motoci	Dogaro da aikace-aikace	Haɗaɗɗen abu / na musamman	→Ɗakin Shiga

 

Kayayyaki daban-daban suna buƙatar gwaje-gwajen muhalli daban-daban dangane da aikace-aikacensu, kayansu, da kuma matsayin masana'antu.Masana'antar LIB tana ba da mafita na kwaikwayon muhalli don gwaje-gwajen da suka shafi zafin jiki da zafi masu zuwa:

Gwajin zafi mai girma

Gwajin zafin jiki mai yawa yana kimanta ko samfura za su iya ci gaba da aikin injina, lantarki, da kuma aiki lokacin da aka fallasa su ga yanayin zafi mai yawa.

Ma'auni gama gari:

· IEC 60068-2-2

· Hanyar MIL-STD-810H 501

Gwajin ƙarancin zafin jiki

Gwajin ƙarancin zafin jiki yana kimanta ingancin samfura a yanayin sanyi.

Ma'auni gama gari:

· IEC 60068-2-1

· Hanyar MIL-STD-810H 502

Kayan aikin da aka shawarta

​​ Babban Wurin Zazzabi

Akwai zaɓuɓɓukan kewayon -20℃~+150℃, -40℃~+150℃, ko -70℃~+150℃ tare da ƙarfin daga 100L zuwa 1000L, wannan ɗakin yana riƙe da canjin zafin jiki a cikin ±0.5℃ da daidaito a cikin ±2℃. Yana rufe gwaje-gwajen hawan zafi mai yawa, ƙarancin zafin jiki, da na'urar motsa jiki ta zafi a cikin na'ura ɗaya, kuma yana iya gudanar da tsawaita lokacin tsufa mai zafi mai yawa ba tare da buƙatar kayan aiki daban ba don nazarin lalacewar kayan aiki na dogon lokaci. -20~+150℃ / -40~+150℃ / -70~+150℃ · 100L–1000L

​​​​​​​​​​​​

Gwajin Zazzaɓi akai-akai da ɗanshi

Gwajin zafin jiki da danshi akai-akai yana fallasa samfuran zuwa yanayin zafin jiki da danshi mai sarrafawa na tsawon lokaci.

Ma'auni gama gari:

· IEC 60068-2-78

Kayan aikin da aka shawarta

​​​ Zazzabi Chamber

Yana da tsawon -20℃~+150℃ zuwa -70℃~+150℃ tare da sarrafa danshi daga 20% zuwa 98% RH, wannan ɗakin yana kiyaye canjin zafin jiki a cikin ±0.5℃ da canjin danshi a cikin ±2.5% RH. An ƙera shi don aiki na dogon lokaci mai ɗorewa, yana tallafawa duka bayyanar zafi-danshi akai-akai da kuma maimaita bayanan yanayin zafi mai danshi, yana ba masana'antun ɗaki ɗaya don gwajin ingancin yanayi a cikin buƙatu da yawa na yau da kullun. Danshi: 10/20–98% RH · Canjin yanayi ±0.5℃ · Canjin yanayi ±2.5% RH

Gwajin hawan keke na zafin jiki

Gwajin zagayen zafin jiki yana kimanta yadda samfura ke jure canje-canje masu maimaitawa tsakanin yanayin zafi mai girma da ƙasa. A lokacin aiki na gaske, samfura da yawa suna fuskantar ci gaba da canjin zafin jiki.

Ma'auni gama gari:

· IEC 60068-2-14

· JESD22-A104

· MIL-STD-810H

Gwajin Saurin Canjin Zafi

Gwajin saurin canjin zafin jiki yana kimanta ingancin samfura lokacin da aka fallasa shi ga saurin canjin zafin jiki.

Ma'auni gama gari:

· IEC 60068-2-14

· ISO 16750-4

Kayan aikin da aka shawarta

​​​ Zauren Kekuna na thermal

Yana aiki a tsakanin -70℃ zuwa +150℃ tare da saurin canjin zafin jiki har zuwa 15℃/min, wanda za'a iya daidaita shi don dacewa da takamaiman ka'idojin gwaji, wannan ɗakin yana tuƙa samfura ta hanyar sauye-sauyen zafin jiki mai sauri da maimaitawa. An gina shi don fallasa nau'in gajiyar kayan aiki da gazawar matakin sassan da ke fitowa ne kawai a ƙarƙashin matsin lamba mai sauri, wanda hakan ya sa ya zama babban kayan aiki don aminci da shirye-shiryen gwajin rayuwa mai sauri.

Gwajin Shock thermal

An tsara gwajin girgizar zafi don fallasa kayayyaki ga canje-canjen zafin jiki kwatsam tsakanin yanayi biyu masu tsauri. Ba kamar zagayowar zafin jiki ba, wanda a hankali ke canza yanayin zafi, girgizar zafi tana canja wurin samfurin gwajin cikin sauri tsakanin yankuna masu zafi da sanyi.

Ma'auni gama gari:

· IEC 60068-2-14

· Hanyar MIL-STD-810H 503

Kayan aikin da aka shawarta

​​​ Dakin Girgizar Zafi na Yanki 2/Yanki 3

Tare da yanayin zafi na yankin zafi da ya kai +220℃ da kuma yanayin sanyi da ya sauka zuwa -70℃ (ya danganta da tsari), wannan ɗakin yana canja wurin samfura cikin sauri tsakanin matsanancin yanayi maimakon yin sauri a hankali. Wannan saurin canja wurin yana sake haifar da matsin lamba mafi tsauri da samfurin zai iya fuskanta, wanda hakan ya sa ya dace musamman ga kayan aikin mota da na lantarki da ke fuskantar canjin zafin jiki na gaske.

​​​​​​​​​​​​​​​​​​​

Gwajin Zafin Jiki da Girgiza Haɗaka

Motoci, jiragen sama, kayan aikin masana'antu, da tsarin sufuri galibi suna fallasa abubuwan da ke cikin muhalli ga matsalolin muhalli masu alaƙa.

Ma'auni masu dacewa:

· Jerin IEC 60068

· MIL-STD-810H

ISO 16750

Kayan aikin da aka shawarta

​​​ Tsarin Gwajin Girgizar Zafin THV

Wannan tsarin ya haɗa kewayon zafin jiki na -50°C zuwa +150°C, sarrafa danshi na RH 30%–98%, da kuma mitoci na girgiza daga 2 Hz zuwa 4000 Hz a cikin wani dandamali guda ɗaya da aka haɗa. Ta hanyar gudanar da kwaikwayon zafin jiki da girgiza a lokaci guda maimakon a jere, yana sake haifar da samfuran damuwa da ke tattare da su a lokacin sufuri da aiki, yana kama gazawar hulɗa da gwajin abubuwa guda ɗaya zai rasa.

Gwajin Busarwa (Tandar Masana'antu / Tandar Injin Turare)

Gwajin busarwa yana cire danshi daga kayan aiki da abubuwan da aka gyara, ko kuma yana warkar da manne da manne, ta amfani da tanda na busarwa ta iska mai zafi ta masana'antu ko tanda na busarwa ta injin don kayan da ke da saurin zafi ko kuma masu buƙatar yanayin busarwa mai ƙarancin iskar oxygen ko ƙarancin matsi.

Ma'auni gama gari:

· IEC 60068-2-2

JEDEC J-STD-033 (abin da ke haifar da rashin danshi)

Kayan aikin da aka shawarta

​​​​​​​​ ​​​​​​​Murhun Busar da Masana'antu	Akwai shi a zaɓuɓɓuka uku na zafin jiki — A: Yanayi ~+250℃, B: Yanayi ~+400℃, C: Yanayi ~+900℃ — tare da zagayawan zafi iri ɗaya don bushewa akai-akai. Ana bayarwa a cikin girman benci da kabad, wanda ya dace da shafa, manne, da abubuwan da ke damun danshi.	​​​​​​​​​​​​​
Vacuum bushewa Tushe	Yana aiki daga +35℃ zuwa +350℃ tare da ƙimar dumama na 6℃/ Matsakaicin zafin da aka samu a cikin injin injin shine -133 Pa. Zagayawan zafi iri ɗaya a ƙarƙashin injin injin yana sa ya dace da shafa, manne, da abubuwan da ke da alaƙa da danshi ko iskar shaka.

Gwajin Tsayi / Ƙarancin Matsi

Gwajin tsayi yana kimanta aikin samfura a ƙarƙashin raguwar matsin lamba a yanayi, yana kwaikwayon aikin tsayi mai tsayi, jigilar iska, ko yanayin sararin samaniya inda bambance-bambancen matsin lamba na iya shafar hatimi, rufin lantarki, da tsarin injina.

Ma'auni gama gari:

· IEC 60068-2-13

· Hanyar MIL-STD-810H 500

Kayan aikin da aka shawarta

​​​​ Ɗakin Gwaji Mai Tsayi / Ƙaramin Matsi

Yana kwaikwayon tsayin da ya kai mita 30,000+ da matsin lamba daga yanayin yanayi zuwa 0.5kPa, wannan ɗakin kuma zai iya haɗa gwajin zafin jiki da tsayi a cikin gudu ɗaya. An tsara shi don fallasa hatimi, rufi, da raunin tsarin da ke bayyana ne kawai a ƙarƙashin raguwar matsin lamba na yanayi - yanayin da gwajin matakin ƙasa ba zai iya bayyanawa ba - wanda hakan ya sa ya zama dole don tabbatar da sararin samaniya da sararin samaniya.

​​​​​​​​​​​​

Gwajin Tsaron Baturi & Cin Zarafi

Gwajin lafiyar batirin da kuma cin zarafinsa yana kimanta halayen batirin lithium da fakitin batirin a ƙarƙashin yanayi mai tsanani ko na cin zarafi, gami da caji fiye da kima, gajeren da'ira a waje, murƙushewa, shigar ƙusa, da kuma guduwar zafi, don tabbatar da ingancin tsaro kafin a saki kasuwa.

Ma'auni gama gari:

· Majalisar Dinkin Duniya 38.3

· IEC 62133

· UL 2580

Kayan aikin da aka shawarta

Dakin Gwaji na Tsaron Baturi da Cin Zarafi

An gina wannan ɗakin ne daga ƙarfe mai ƙarfi, mai hana fashewa kuma an sanya masa kayan aikin gwaji na murƙushewa, shigar ƙusa, da kuma na'urorin gwaji na ɗan gajeren lokaci, an gina shi ne don yanayin da zai iya haifar da gobara ko guduwar zafi. Tsarin shaye-shaye da kashe gobara, tare da sa ido daga nesa da tattara bayanai, suna ba da damar gwajin aminci ya ci gaba da aiki yayin da ake bin ƙa'idodi na UN 38.3, IEC 62133 da UL 2580.

Gwajin Gwajin Damuwa na Muhalli (ESS)

Gwajin Duba Damuwa na Muhalli yana amfani da saurin zagayowar zafin jiki, sau da yawa tare da girgiza bazuwar, don haifar da lahani a cikin masana'antar lantarki kafin a jigilar su, ba tare da lalata na'urori masu kyau ba. Ana amfani da shi galibi azaman tsarin tantance layin samarwa maimakon gwajin cancantar ƙira.

Ma'auni gama gari:

· MIL-STD-2164

· IEST-RP-PRC-001

Kayan aikin da aka shawarta

​​​​ Dakin Binciken Damuwa na Muhalli (ESS)​​

Yana da ƙarfin canjin zafin jiki har zuwa 20℃/min ko sama da haka, tare da zaɓin teburin girgiza mai haɗawa don tantance damuwa, an gina wannan ɗakin don amfani da layin samarwa maimakon cancantar ƙira. Bayanan martaba masu zagaye-zagaye da yawa waɗanda za a iya tsara su suna haifar da lahani na masana'antu kafin jigilar kaya, suna kama na'urori masu rauni da wuri ba tare da lalata kyawawan waɗanda ke wucewa ta layin ɗaya ba.

​​

Gwajin Zafin Danshi Mai Zafi Mai Zafi

Gwajin zagaye na zafin danshi yana fallasa samfuran zuwa zagayowar zafi mai yawa na awanni 24 tare da bambancin zafin jiki, gami da danshi a lokacin raguwar zafin jiki. Ya bambanta da gwajin danshi mai ɗorewa kuma ana amfani da shi don tantance tsatsa, lalacewar rufin gida, da kumburin abu a ƙarƙashin yanayin danshi mai canzawa.

Ma'auni gama gari:

· IEC 60068-2-30

Kayan aikin da aka shawarta

Ɗakin Gwaji Mai Zafi na PV Module

Ɗakin da ake amfani da shi don gwajin T/H akai-akai (duba sama) zai iya gudanar da bayanan yanayin zafi mai ɗanshi, yana daidaita canjin zafin jiki da danshi ta hanyar maimaita zagayowar zafi/danshi. Musamman ga cikakken girman bangarorin photovoltaic, Ɗakin Gwaji na Zafi na PV Module yana ba da gwaji na tsawon sa'o'i 1000 akai-akai, ba tare da katsewa ba tare da kayan aiki na musamman don hawa da sanyawa a cikin panel, bisa ga IEC 61215 (MQT 13).

​​​​​​​​​​​​​​​​​​​​

Gwajin Muhalli Mai Girma

Fakitin batir, ababen hawa, da sauran manyan kayan haɗa batir galibi sun wuce ƙarfin ɗakunan muhalli na yau da kullun, wanda ke buƙatar a cire su ko a gwada su ta wasu kamfanoni.

Ma'auni gama gari:

Dogaro da aikace-aikace

Kayan aikin da aka shawarta

Ɗakin Muhalli Mai Tafiya a Cikin Gida

An ƙera shi musamman bisa ga ainihin girman samfurin abokin ciniki, tare da babban sarari na ciki don manyan samfura. Ya dace da fakitin batir, motoci, da manyan haɗuwa, yana tallafawa mafita na gwaji na musamman ba tare da wargazawa ko fitar da su zuwa dakin gwaje-gwaje na ɓangare na uku ba.

​​​​​​​​​​​​​​​​​​​​

 

---

Zabar Gidan Da Ya dace

Zaɓar ɗakin muhalli mai dacewa ya dogara da yanayin zafin da ake buƙata, buƙatun zafi, saurin canjin zafin jiki, girman samfurin, ma'aunin gwaji, aikace-aikacen masana'antu, da tsawon lokacin gwaji. Injiniyoyinmu za su iya ba da shawarar kayan aiki mafi dacewa bisa ga buƙatun samfurin ku da manufofin gwaji - ba wai kawai ya dace da ku da mizani ba, har ma ya tabbatar da cewa ɗakin zai haifar da yanayin gazawar da samfurin ku ke buƙata don rayuwa.

---

 

FAQ

Waɗanne kayan aiki ake amfani da su don gwajin zafin jiki da danshi?	Ana yin gwajin zafin jiki da danshi ta amfani da ɗakin gwajin muhalli, wanda kuma ake kira ɗakin danshi na zafin jiki ko ɗakin yanayi. LIB tana samar da ɗakunan TH Series, TR Series, TS Series, THV Series, da ɗakunan da aka keɓance don buƙatun gwaji daban-daban.
Menene bambanci tsakanin zagayowar zafin jiki da gwajin girgizar zafi?	Zagayen zafin jiki a hankali yana canza yanayin zafi tsakanin yanayi mai girma da ƙasa a kan maimaitawar zagayowar. Gwajin girgizar zafi yana haifar da sauye-sauye cikin sauri tsakanin yankuna masu zafi da sanyi, yana haifar da ƙarin matsin lamba mai tsanani - wanda ake amfani da shi don gwajin canji mai tsanani maimakon kimanta aminci gabaɗaya.
Shin ɗaki ɗaya zai iya yin gwajin zafin jiki da danshi?	Eh. Humidifier zafin jiki na LIBDakunan gwaje-gwaje na iya yin gwaje-gwajen haɗin gwiwa. Aikace-aikacen da ke buƙatar canje-canjen zafin jiki mai sauri, girgizar zafi, kwaikwayon tsayi, ko gwajin amfani da batir yawanci suna buƙatar kayan aiki na musamman.
Me yasa ake yin gwajin lafiyar batirin daban da gwajin T/H na yau da kullun?	Gwajin lafiyar batirin da kuma amfani da shi ta hanyar da ba ta dace ba ya ƙunshi yanayi da ka iya haifar da wuta, fitar da iska, ko fashewa - kamar caji fiye da kima, gajeren da'ira, ko murƙushewa. Wannan yana buƙatar ɗakunan da aka gina da gangan, waɗanda ba sa fashewa tare da tsarin kashe gobara da kuma fitar da hayaki.
Wane garanti da sabis ne LIB ke bayarwa?	LIB yana bayar da Garanti na shekaru 3, tallafin kulawa na tsawon rai, taimakon fasaha, da kuma shawarwarin injiniya — wanda wakilai 29 da cibiyoyin hidima 4 na ƙasashen waje ke tallafawa a duk faɗin duniya, don haka tallafi ba ya taɓa yin nisa ba.

 

Kuna buƙatar Maganin Gwajin Zafin Jiki da Danshi?

Ko kuna buƙatar a dakin gwajin zafin jiki da zafi, zazzabi da zafi majalisar, murhun masana'antu, ɗakunan gwaji masu sarrafa zafin jiki, dakin gwajin baturi, gwajin zafin jiki mai yawa, gwajin danshi, gwajin tsayi, gwajin amincin baturi, ko ɗakin kwaikwayon muhalli na musamman, LIB na iya samar da mafita mai dacewa.

Injiniyoyinmu za su iya ba da shawarar kayan aikin gwaji mafi dacewa dangane da buƙatun samfuran ku, ƙa'idodin masana'antu, da manufofin gwaji.

Tuntuɓi LIB a yau don tattauna buƙatun gwajin muhalli.